Rtd Sensors

Product Details:

We Digiqual Systems organization that is engaged in providing our clients with Rtd Sensor. All the products are available in different models, designs and sizes at market leading prices. Manufactured using quality components, these products are designed as per the specifications laid down by the clients.

Features:

• Optimum performance
• Less maintenance
• Longer functional life

Specifications :

• Calibration: As per DIN 43760
• Configuration: Simplex/Duplex
• Lead Configuration: 3 wire system
• Accuracy: Class B. 0.8 Deg C at 100 Deg.C, Also available Class A on request
• Sheath Length: Max.Length – No bar. However for length above 2000MM
• Insulation: MGO (Mineral Insulated)
• Process Connection (*): Optional, Available with BSP, BSPT, NPT threads- fixed or adjustable compression fitting
• Process connection Material: SS 304 /SS 316
• Termination: Screw type on ceramic terminal block in die-cast Aluminium Head, also available with weatherproof head (IP-55,IS2147) and Flameproof head.
• Cable Entry: ½” BSP, ¾”BSP.

Technical Specifications:

Product Details:

We are a reputed organization that is engaged in manufacturing and supplying Stator Winding Rtd Temperature Sensor. Our team of expert professionals makes use of quality components and spare parts to manufacture these products. In addition to this, we keep a bulk stock of these products in our warehouse for meeting urgent needs of customers. Features Dimensionally accurate Easy to use Durable

Product Details:

Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators. Unlike on/off devices, It allows continuous measurement of winding temperature. Normally six sensors are recommended for each motor, Two per Phase. This RTD are generally flat type in construction and are available in various sizes. Specification Type PT 100(100 ohm at 0 degC)* Model TSRE series Body Material Fibre Glass epoxy Temperature Class Class F(Temperature limit155 DegC) or Class H(Temperature limit180 DegC) Calibration Standard IEC 60751 Or DIN 43760 Temperature coefficient(TCR)0.003850 Accuracy Class A/B/2B Sensing current 10mA maximum Dielectric strength 3 KV/50Hz for 1minute between leads & surface of Glass epoxy body (Increased dielectric strength up to 5 KV/ 50Hz for 1 minute upon request.)

Additional Information:

• Production Capacity: 100 Nos
• Delivery Time: Ready Stock

Product Details:

Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators. Unlike on/off devices, It allows continuous measurement of winding temperature. Normally six sensors are recommended for each motor, Two per Phase. This RTD are generally flat type in construction and are available in various sizes. Specification Type PT 100(100 ohm at 0 degC)* Model TSRE series Body Material Fibre Glass epoxy Temperature Class Class F(Temperature limit155 DegC) or Class H(Temperature limit180 DegC) Calibration Standard IEC 60751 Or DIN 43760 Temperature coefficient(TCR)0.003850 Accuracy Class A/B/2B Sensing current 10mA maximum Dielectric strength 3 KV/50Hz for 1minute between leads & surface of Glass epoxy body (Increased dielectric strength up to 5 KV/ 50Hz for 1 minute upon request.)

Product Details:

We are an eminent organization that is engaged in manufacturing and supplying Rtd Sensor With Head & Terminal. Demanded by several industries, these products are available in various models and specifications as well as can be customized as per clients’ needs and demands. Moreover, our offered products are thoroughly checked by quality controllers on different parameters to assure zero defect.

Features:

• Longer service life
• Easy to replace
• Efficient performance

Specifications :

• Calibration: As per DIN 43760
• Configuration: Simplex/Duplex
• Lead Configuration: 3 wire system
• Accuracy: Class B. 0.8 Deg C at 100 Deg.C, Also available Class A on request
• Sheath Length: Max.Length – No bar. However for length above 2000MM
• Insulation: MGO (Mineral Insulated)
• Process Connection (*): Optional, Available with BSP, BSPT, NPT threads- fixed or adjustable compression fitting
• Process connection Material: SS 304 /SS 316
• Termination: Screw type on ceramic terminal block in die-cast Aluminium Head, also available with weatherproof head (IP-55,IS2147) and Flameproof head.
• Cable Entry: ½” BSP, ¾”BSP.

Technical Specifications:

Product Details:

Our company specializes in manufacturing and supplying Duplex (Double Element) Stator Winding RTDs. All the manufactured products are thoroughly checked by a team of expert quality controllers on different parameters to ensure flawlessness. In addition to this, we provide tailor-made solution for these products as per clients’ needs and demands.

Features:

• Compact design
• Corrosion resistant
• Longer functional life

Product Details:

We are a renowned organization that is engaged in manufacturing and supplying premium quality Rtd with Head & Terminal. The offered products are manufactured keeping in mind the variegated requirements of our esteemed patrons. High quality components and spare parts are brought into use for manufacturing these products.

Features:

• Minimal maintenance
• Quality-tested
• Easy to fit

Specifications :

• Calibration: As per DIN 43760
• Configuration: Simplex/Duplex
• Lead Configuration: 3 wire system
• Accuracy: Class B. +0.8 Deg C at 100 Deg.C, Also available Class A on request
• Sheath Length: Max.Length – No bar. However for length above 2000MM
• Insulation: MGO (Mineral Insulated)
• Process Connection (*): Optional, Available with BSP, BSPT, NPT threads- fixed or adjustable compression fitting
• Process connection Material: SS 304 /SS 316
• Termination: Screw type on ceramic terminal block in die-cast Aluminium Head, also available with weatherproof head (IP-55,IS2147) and Flameproof head.
• Cable Entry: ½” BSP, ¾”BSP.

Technical Specifications:

Product Details:

Motor Winding Rtd