Laboratory Water Bath

Product Details:

General Description & Specifications

Accelerated Curing Tank having capacity to accommodate 6/12/18 Concrete Cubes of 150mm size with a facility for accelerated curing by Boiling water method up to temperature range : 100 +/- 2 deg.C as per IS standard IS : 9013. Also it will have capacity for curing by warm water method at temperature 55 +/- 2 deg.C

Tank will consist of a rectangular double walled metal cabinet, inside lined with stainless steel, outer powder coated. Easily replaceable high Wattage heaters are mounted in side the chamber. A slow speed stirrer is provided to circulate water inside the chamber to maintain the uniform temperature of water. A strong stainless steel perforated platform is provided for keeping the cubes and also have a lid with lifting handle to cover the chamber.

The temperature is indicated and controlled by a DIGITAL auto tuning PID Temp. Controller with soak timer to control the duration of heating and then to shut down the system without manual attendance. The front panel will have power supply indicating lamp, control action indication lamp and one main switch. Suitable for operation on 220 V, 50 Hz single phase, AC supply or 440 V 50 Hz, three phase AC supply, for bigger size of curing tank.

Product Details:

Digiqual - 12 Hole Water Bath Double walled Chamber , completely made of stainless steel. The temperature is controlled by a thermostat from ambient 5 to 90 °C with a control accuracy of ± 5 °C. The bath is provided with two pilot lamps concentric rings on/off switch, wire and plug to work on 230 V AC. Chamber size 300 x 250 x 100 mm(6 holes of Ø 75 mm) 300 x 405 x 100 mm(12 holes of Ø 75 mm)

Product Details:

Digiqual - 6 Holes Laboratory Water Bath

Double walled completely made of stainless steel. The temperature is controlled by a thermostat from ambient 5 to 90 °C with a control accuracy of ± 5 °C. The bath is provided with two pilot lamps concentric rings on/off switch, wire and plug to work on 230 V AC.