Laboratory Rtd Sensors

Product Details:

Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators. Unlike on/off devices, It allows continuous measurement of winding temperature. Normally six sensors are recommended for each motor, Two per Phase. This RTD are generally flat type in construction and are available in various sizes. Specification Type PT 100(100 ohm at 0 degC)* Model TSRE series Body Material Fibre Glass epoxy Temperature Class Class F(Temperature limit155 DegC) or Class H(Temperature limit180 DegC) Calibration Standard IEC 60751 Or DIN 43760 Temperature coefficient(TCR)0.003850 Accuracy Class A/B/2B Sensing current 10mA maximum Dielectric strength 3 KV/50Hz for 1minute between leads & surface of Glass epoxy body (Increased dielectric strength up to 5 KV/ 50Hz for 1 minute upon request.)

Product Details:

Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators. Unlike on/off devices, It allows continuous measurement of winding temperature. Normally six sensors are recommended for each motor, Two per Phase. This RTD are generally flat type in construction and are available in various sizes. Specification Type PT 100(100 ohm at 0 degC)* Model TSRE series Body Material Fibre Glass epoxy Temperature Class Class F(Temperature limit155 DegC) or Class H(Temperature limit180 DegC) Calibration Standard IEC 60751 Or DIN 43760 Temperature coefficient(TCR)0.003850 Accuracy Class A/B/2B Sensing current 10mA maximum Dielectric strength 3 KV/50Hz for 1minute between leads & surface of Glass epoxy body (Increased dielectric strength up to 5 KV/ 50Hz for 1 minute upon request.)

Additional Information:

• Production Capacity: 100 Nos
• Delivery Time: Ready Stock

Product Details:

We Digiqual Systems organization that is engaged in providing our clients with Rtd Sensor. All the products are available in different models, designs and sizes at market leading prices. Manufactured using quality components, these products are designed as per the specifications laid down by the clients.

Features:

• Optimum performance
• Less maintenance
• Longer functional life

Specifications :

• Calibration: As per DIN 43760
• Configuration: Simplex/Duplex
• Lead Configuration: 3 wire system
• Accuracy: Class B. 0.8 Deg C at 100 Deg.C, Also available Class A on request
• Sheath Length: Max.Length – No bar. However for length above 2000MM
• Insulation: MGO (Mineral Insulated)
• Process Connection (*): Optional, Available with BSP, BSPT, NPT threads- fixed or adjustable compression fitting
• Process connection Material: SS 304 /SS 316
• Termination: Screw type on ceramic terminal block in die-cast Aluminium Head, also available with weatherproof head (IP-55,IS2147) and Flameproof head.
• Cable Entry: ½” BSP, ¾”BSP.

Technical Specifications: